磁力泵灌装机注意事项
Notes on magnetic pump filling machine
1、查检电源电压220（±5%）频率、50Hz/60Hz（±5%）的交流电源供电，正确使用客定保险丝，在装御保险丝时必须先将电源线拔除。
1. Check the AC power supply with 220 (± 5%) frequency and 50 Hz / 60 Hz (± 5%) power supply voltage, and correctly use the custom fuse. The power line must be pulled out before installing the fuse.
2为避免人身伤害，请使用按地交流电源插座，电源插头应按触良好。否则容易损坏灌装机
2 to avoid personal injury, please use the AC power socket on the ground. The power plug should be well touched. Otherwise, it is easy to damage the filling machine
3.灌装机应放置在通风干燥、灰尘少的地方，并要求水平放置与墙壁或其他物体的距离应大于20CM，确保排风正常
3. The filling machine should be placed in a dry and ventilated place with less dust, and the distance between the filling machine and the wall or other objects should be greater than 20cm to ensure the normal ventilation
4、逆止阀必须垂直向下，否则影响准确性。
4. Check valve must be vertical downward, otherwise accuracy will be affected.
5、灌充头必须垂直向下，否则会出现滴液现象。
5. The filling head must be vertically downward, otherwise there will be dripping.
6、管路弯角不宜人小，合则影响流量及准确性。
6. The bend angle of the pipeline should not be small, and it will affect the flow and accuracy.
7、原料桶液位高低不宜相差太大，否则影响精度
7. The liquid level difference of raw material barrel should not be too large, otherwise the accuracy will be affected
8、挥发性液体请在流通的空气环境下使用
8. Volatile liquids should be used in a circulating air environment