The rotor pump is a small device with simple structure. The important thing is that this device is very easy to carry and move, so it is favored by many consumers. In addition, the oil used in the rotor pump can be recycled for secondary use, which is in line with the concept of energy-saving development. I believe that the development trend of the rotor pump industry will be stable in the future.

Various solid impurities contained in the waste crude oil, that is, high viscosity/high efficiency requirements for the service life of the pump. Later maintenance costs. The treatment of the tank bottom should meet the characteristics of gas-liquid mixed transportation. As a positive displacement pump, the rotor pump can pass through large particles, unlike centrifugal pump, which has higher requirements for the medium. It has great advantages in liquid mixed transportation, and its rubber-coated rotor can provide strong self-priming capacity.

The specific advantages of rotor pump are as follows: simple structure; Small size; The overflow chamber, gear box and reduction box are integrated; Large speed variation range; 70-500rpm/mi。 high pressure; It can reach 25bar and the working principle is smooth and reasonable.

No blockage; With strong self-priming function; Self-priming capacity reaches 9m, with a wide range of application; 0.2—4000m ³/ h. There are many kinds of applicable fluid media.

The high viscosity rotor pump should be checked and repaired frequently, and the electric oil barrel pump should be checked and repaired frequently, and the power line should be checked: whether the internal wire, plug and switch are excellent, whether the insulation resistance is normal, whether the brush tail seat is loose, the commutator and the brush touch is excellent, whether the armature winding of the stator winding is moderately broken, whether the bearing and rolling parts are damaged, etc. Pay attention to the insulation resistance of the high viscosity rotor pump. It is necessary to measure the insulation resistance of the winding with a 500 meter before using the electric pump that is not necessary for a long time or is used in a humid environment. If the insulation resistance between the winding and the motor shell is less than 7, it is necessary to dry the winding.

The rotor pump can transport chemical substances or some corrosive substances in the process of operation, and there is no need to worry about the corrosion of the equipment by these substances. Therefore, the equipment is widely used at present. However, some fault problems will inevitably occur during the operation of the equipment. If general faults are encountered, they can be checked and solved in the following ways.

If the working efficiency of the stainless steel cam rotor pump decreases, it is necessary to check whether the parts of the equipment are loose in a timely manner. Because of the loose parts of many equipment in the process of use, the delivery rate of the equipment will also decrease. In addition, once the noise problem occurs when the equipment is working, it is also necessary to stop working in time to check, and observe whether the parts of the equipment need to be lubricated, or whether simple maintenance is needed.

Now with the continuous development of science and technology, the working efficiency of the rotor pump has also begun to improve. But in order to make the equipment bring benefits to the production work when it works, it is necessary to regularly check the performance of the equipment and the working condition of the parts.

In the process of working, the rotor pump converts electrical energy into transmission energy, thus achieving the purpose of fluid transmission. The volume of the mechanical equipment is relatively small, so it can save a lot of space for production and work units. Therefore, the equipment is widely used in many workplaces.

The rotor pump is also widely used, which can be used in the transportation of some highly corrosive substances, and also in the transportation of some production substances with high viscosity, providing many convenient conditions for these work areas. The equipment is not only small in size, but also very beautiful. It is an indispensable equipment product in modern production and work units.