Inside the easy-load pump head, an eccentric wheel is connected to the pump tube automatic positioner. The shell is firm and chemically resistant. Through this design, the pump tube can be replaced quickly and easily without removing the pump head from the driver. The built-in pump tube guiding device ensures that the pump tube is installed in a better position, so as to exert good performance and maximize the life of the pump tube. The spring pump tube retainer automatically ensures the safety of the pump tube, extends the life of the pump tube, and ensures that pump tubes of various sizes can perform well. By adjusting the degree of bite "squeeze" to achieve the maximum pressure or the longest service life.

  Flow rate range:

　　0.045~2300mL/min per channel depends on the drive speed and pump tube size, 2-, 4-, and 8-channel pump heads can be stacked, up to 24 channels.

　　1. Flow rate range: 0.045~2300mL/min per channel depends on the drive speed and pump tube size;

　　 2, 2-, 4-, and 8-channel pump heads can be stacked, up to 24 channels;

　　3, processing stainless steel (SS) and anodized aluminum SS rotors, bearings, and rollers can run continuously and stably;

　　4. The transmission pulsation of the six-roller pump head is lower; the flow rate of the three-roller pump head is higher;

5. The pump head compatible with L/S precision pump tubing is compatible with dual cassette pump tubing sizes L/S 13, L/S 14, and L/S 16; the pump head compatible with L/S high-efficiency precision pump tubing can be Compatible with dual cassette pump pipes with sizes L/S 15, L/S 24, and L/S35;

　　6. L/S drivers that can be installed with 2 or more pump heads are compatible; the minimum power requirement is 1/10hp;

　　7. Install the pump tube, close the occlusal bed, and start the pump—dual-clamp double-node pump tube can achieve a good occlusal degree without adjustment.